Summer arc-flash protective suit (8 cal/cm², type 2/1)

The suit is intended to provide comprehensive protection for electrical personnel against harmful occupational factors, primarily the thermal energy generated during an arc-flash event, during operational and technical servicing, as well as installation, repair and adjustment tasks performed on various types of electrical equipment.

DSTU EN 61482-2:2021, DSTU EN IEC 61482-1-1:2021, DSTU EN ISO 13688:2016, DSTU EN 531:2005, DSTU EN ISO 11612:2018, DSTU EN ISO 14116:2016, DSTU EN 1149-1:2017.

Construction

The summer arc-flash protective suit (8 cal/cm², type 2/1) consists of a jacket and trousers.
Arc Rating: 8 cal/cm².

The jacket is grey with reflective strips, straight-cut, with a central zipper closure covered by a placket, a stand-up collar, and set-in sleeves. The front panel consists of three parts: a yoke, a central section, and a side section. On the side sections, there are lower patch pockets measuring at least 20×19 cm with flaps, and upper patch pockets measuring at least 14×15 cm with flaps. On the inside of the left front panel, there is an internal patch pocket. The back has a yoke and two vertical shaped seams. The sleeves are two-seamed with an attached cuff. The cuff has a button fastening.

The trousers are grey with reflective strips, straight-cut, with a zipper closure in the center seam of the front panels, an attached waistband, and belt loops. The front panel includes a side patch pocket with a slanted opening and a shaped knee pad. The waistband fastens with a button and includes an elastic insert on the side seams.

Placement of flame-resistant reflective strips:
– on the front panels — along the lower edge of the yokes;
– on the back — under the yoke;
– at the sleeve hems;
– at the hems of the front and back trouser panels.

Advantages

High-quality flame-resistant reflective materials are used to improve worker visibility and safety.

The suits can be manufactured in the customer’s corporate colors and with company logos.

Arc-flash protective clothing must be used only together with appropriate head, hand and foot protection to ensure the maximum level of protection.

Suit weight: not more than 3 kg.

    Callback ordering form

    Copyright © 2026 Legio LLC All Rights Reserved.
    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.